22 March 2017
WYG has been working with its Cumbria Nuclear Solutions Ltd consortium partner, James Fisher Nuclear (JFN), to support an important Sellafield Ltd. decommissioning project undertaking a drone survey of a stack which is approximately 120m above ground level.
The UAV survey of the chimney stack in the active area accurately assessed how the chimney’s cowling, at the very top of the stack, was attached. This will allow Sellafield Ltd, with the help of our 3D imaging and civil engineering consultancy, to compile an accurate method statement for its safe demolition.
After the initial flight of around 7 minutes, we provided the first set of footage and played it back for the Sellafield team to view.
One of the on-site Sellafield engineers said: “This was certainly an impressive use of UAV technology. It gave us more information about the stack in that first 7 minutes than we have ever had. This is a simple and efficient way to safely inspect areas like this in a fraction of the time and cost needed for scaffolding or bringing in special access vehicle and without staff working at height."
Alex Grainger, Project Manager at WYG, said: “We are delighted to have our Cumbria Nuclear Solution Limited (CNSL) consortium partner, James Fisher Nuclear, on board to support us on this project through our single source contract with Sellafield to provide Civil Inspections and Topographical Surveying (CITS) Services to support Sellafield Ltd. achieve their asset management objectives and to inform the decommissioning process.”
Gareth Clarke, WYG and CITS Framework Director, added: "This has been the culmination of many years effort to bring this innovation to the Sellafield Site. The use of UAV’s in combination with our nuclear SQEP surveying and engineering capability has the potential to add significant value to the decommissioning process as seen in this project."
We carried out two more flights around all sides of the stack to provide enough information to produce a 3D model and a condition inspection of the stack. The pilots then carried out a final inspection of the inside of the stack, which was believed to be too difficult to access, this was done with ease and posed no threat to any equipment which again demonstrated to the capabilities of the UAV.
We see our Geospatial team’s drone capability as a great vehicle for efficient data capture, offering significant time and cost savings. This should complement our broad sphere of technical consultancy to offer added value to our clients.